REMIC D5400 LB/WL1 Live Double Bass Microphone for Wireless Systems

D5400 LB/WL1 Double Bass – Live Mic. for Wireless Systems

The REMIC D5400 LB/WL1 supplied with a LEMO-3 connector allows you to connect the REMIC microphone to SHURE (UR1M, AD1) and SENNHEISER (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000) Transmitter modules with LEMO-3 connector.

Due to the fact that most beltpack wireless transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.

The D5400 LB/WL1 is based on the same principle as the D5400 LB live model, but is supplied with a different connector – the LEMO-3 connector, which allows you to connect your D5400 LB/WL1 microphone to a variety of adapters for Shure and Sennheiser wireless systems.

Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.

MORE ABOUT THE D5400 LB/WL1 MODEL:

The REMIC D5400 LB/WL1 microphone model is based on the same principle as the normal REMIC D5400 LB Live model, only with a different connector and adapted for lower voltage.

The REMIC D5400 LB/WL1 Live model is designed for extremely loud live productions and delivers a natural, but more “dry” and “woodish” sound response in comparison to the “Studio” model.

The “LB” model represents the highest suppression of ambient sound sources ever achieved by a condenser microphone.

So if you need a microphone with low acoustic feedback response, the REMIC D5400 LB/WL1 for wireless systems is the answer.

At the same time, the microphone will maintain the aesthetic appearance of the instrument towards your audience, since there is no clamps and clips in order to mount and hold the microphone.

With Built-In Windshield

The built-in windshield is designed  to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable. With the built-in windshield option, you do not need to add any other windshields to your microphone. The built-in windshield will not change the quality of the microphone in other performance contexts.

How to mount your REMIC Double Bass Microphone

Any publication of REMIC MICROPHONES on this website may include technical inaccuracies or typografical erros. Changes may frequently be made to these publications

All products and publications of REMIC MICROPHONES are subject to change without notice.

All products of REMIC MICROPHONES including designs, technical functionality and placement of function is protected, unauthorized reproduction or distribution of these products or parts thereof is considered as unlawful, which we may act upon.