V5200 LB/WL Violin/Viola Live mic for wireless systems
MORE ABOUT THE “LB/WL” MODEL:
Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES
have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.
The V5200 LB/WL is based on the same principle as the V5200 LB, and can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility in order to move around on the stage in extremely loud live productions.
The REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser. In order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:
Supported Wireless Transmitters:
SHURE w/TA4F Connector | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M
SHURE w/3P LEMO Connector | UR1M
SENNHEISER w/3.5 TRS Connector | SK100G3/G4, SK300G3/G4, SK500G3/G4
SENNHEISER w/LEMO-3 Connector | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000
Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.
The LB/WL microphone model is the same as the normal LB model only with a different connector. It delivers a natural, but more “dry” and “woodish” sound response in comparison to the “Studio/Live” model.
The “LB” model represents the highest suppression of ambient sound sources ever achieved by a condenser microphone. So if you need a microphone with low acoustic feedback response, the V5200 LB/WL is the answer.
At the same time the microphone will maintain the aesthetic appearance of the instrument towards your audience, since there are no clamps and clips in order to mount and hold the microphone, you also retain a full and undisturbed view of the fretboard.
The V5200 LB/WL are also suitable for other violin related instruments such as Hardanger fiddle / Hardingfele, Nyckelharpa, Drejelire, Hurdy-Gurdy etc.
With Built-In Windshield
All microphones for strings have a built-in windshield, which is designed to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable. With the built-in windshield, you do not need to add any other windshields to your microphone. The built-in windshield does not change the quality of the microphone or sound quality in general.
Any publication of REMIC MICROPHONES on this website may include technical inaccuracies or typografical erros. Changes may frequently be made to these publications
All products and publications of REMIC MICROPHONES are subject to change without notice.
All products of REMIC MICROPHONES including designs, technical functionality and placement of function is protected, unauthorized reproduction or distribution of these products or parts thereof is considered as unlawful, which we may act upon.