REMIC W3000 G1/WL Brass & Woodwind Mic. for Wireless Systems

NEW W3000 G1/WL (Generation 1)
Exceptional condenser microphone for brass and woodwind instruments.

NEW OPTIMIZED FEATURES OF W3000 G1/WL:
– Optimized tonal transient response
– Optimized mechanical grip
– Optimized protection of diffusion filter
– Optimized for balanced low impedance transformer inputs

For studio and live performance.
Superior gain before feedback.
Superior suppression of neighbor instruments and ambient noise.

REMIC W3000 G1/WL Brass and Woodwind Mic. for Wireless Systems

Due to the fact that most wireless beltpack transmitters do not provide 48 volt of phantom power nor a balanced input stage, a series of REMIC MICROPHONES have been designed to support selected wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt.

The W3000 G1/WL can be ordered with different connectors for selected wireless transmitters to obtain the highest sound quality as well as high flexibility when moving around on the stage in live productions.

The REMIC wireless solutions are developed to fit selected wireless systems from Shure and Sennheiser.

In order to choose the correct connector, you need to select the connector needed for a particular wireless transmitter, please see supported wireless solutions below:

SUPPORTED WIRELESS TRANSMITTERS:

SHURE w/TA4F Connector | FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M
SHURE w/3P LEMO Connector | UR1M

SENNHEISER w/3.5 TRS Connector | SK100G3/G4, SK300G3/G4, SK500G3/G4
SENNHEISER w/LEMO-3 Connector | SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000

Please note that some dynamic non-linearities will occur when using wireless systems in comparison to a wired solution.

 

Needs 3-8 volt of phantom power

FOR WIRELESS SOLUTIONS

Worldwide FREE SHIPPING
30 DAYS MONEY BACK

Clear

SKU: 3000-1 Categories: ,

Stay up to date

Sign up for the REMIC Newsmail
SIGN UP
close-link